In the spring of 2005, Sanborn as part of the Dewberry team was contracted to execute a LiDAR (Light Detection and Ranging)
survey campaign to collect the 3-dimensional positions of a dense set of masspoints for the entire 689 plus square mile project
area of Baltimore County, Maryland. These data are suitable for the development of a digital elevation model (DEM) to support
orthometric photo rectification and contouring. The lidar first and Last Return value data were obtained from the post processed
data and provided in separate files containing all georeferenced First Return and Last Return data in an ASCII comma delimited
format to the NOAA Coastal Services Center. For data storage and Digital Coast provisioning purposes, the NOAA Coastal Services
Center converted the ascii data to geographic coordinates, ellipsoid heights in meters, and las format and created a bare
earth data set using an automated algorithm.
Citation
Title 2005 Baltimore County Maryland Lidar
publication Date
2012-01-01
presentationForm
imageDigital
cited responsible party
-
originator
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
organisation Name
Baltimore County, MD GIS Services
cited responsible party
-
publisher
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
other Citation Details
Cinergi keyword enhanced.File generated at Thu Aug 24 10:00:27 UTC 2017
purpose:
The Baltimore County LiDAR campaign was designed specifically to collect LIDAR derived masspoints at an approximate spacing
of 1.5 meters or better within the project area. The data was processed to facilitate the generation of an appropriate DEM
for orthorectification and 2' contour mapping. Rigorous quality assurance procedures were followed to ensure that the appropriate
data accuracy was achieved.
Browse image (thumbnail):
thumbnail file name:
file type: kmz
thumbnail file description:
This kmz file shows the extent of coverage for the 2005 Baltimore County lidar data set.
Resource language:
eng; USA
Resource progress code:
completed
Resource Maintenance Information
maintenance or update frequency:
notPlanned
Constraints on resource usage:
Constraints
Use limitation statement:
These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that
temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual
surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.
Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data
are NOT to be used for navigational purposes.
Constraints on resource usage:
Legal Constraints
Use Limitation
While every effort has been made to ensure that these data are accurate and reliable within the limits of the current state
of the art, NOAA cannot assume liability for any damages caused by any errors or omissions in the data, nor as a result of
the failure of the data to function on a particular system. NOAA makes no warranty, expressed or implied, nor does the fact
of distribution constitute such a warranty.
Spatial representation type code:
vector
Resource extent
Geographic Extent
Geographic Bounding Box
westBoundLongitude
-76.9156
eastBoundLongitude
-76.3155
northBoundLatitude
39.7221
southBoundLatitude
39.1934
Temporal Extent
2005-03-18
2005-04-15
Additional information on resource:
The original Lidar Acquisition plan was designed for all East/West flight lines. Due to several Air Traffic Control Restrictions
in the southern portion of the County, 54 North/South flight lines were used to acquire the southern portion of the county,
minimizing time in restricted airspace. In addition, the Bay Coast line was planned for acquisition within one hour either
side of low tide. Due to the same ATC restrictions it was impossible to comply with the low tide requirement for this area.
point of contact
-
pointOfContact
organisation Name
Baltimore County GIS Services
Contact information
Telephone
Voice 410.887.2553
Address
400 Washington Ave, Towson, Maryland, 21204
Country US
Description Registry that accesses the EPSG Geodetic Parameter Dataset, which is a structured dataset of Coordinate Reference Systems
and Coordinate Transformations.
name Of Measure Horizontal Positional Accuracy Report
evaluation Method Description
LIDAR First Return and Last Return data were compared with airport surveyed elevations provided by Kinematic survey. The data
and survey were compared and verified per project specifications. The horizontal accuracy of the FR and LR data meets the
15 cm accuracy normally achieved from this flight height and scan resolution for this data set.
AbsoluteExternalPositionalAccuracy
name Of Measure Vertical Positional Accuracy Report
evaluation Method Description
The vertical accuracy of the FR and LR data was checked using LIDAR First Return and Last Return data were compared with airport
surveyed elevations provided by Kinematic survey. The data and survey were compared and verified per project specifications.
The Fundamental Vertical Accuracy (FVA) tested 21.9 cm (0.72 ft) at the 95% confidence level in open terrain, based on RMSE
x 1.96. The RMSE for this data set is 11.2 cm. For more information about the vertical accuracy, please refer to The Report
of Vertical Accuracy Testing which may be accessed at: ftp://ftp.csc.noaa.gov/pub/crs/beachmap/qa_docs/md/2005_Baltimore_County_Lidar_Vertical_Accuracy_Report.pdf
Completeness Commission
evaluation Method Description
Sanborn and Dewberry performed various inspections of the BE data to ensure that each file contained points within the project
limits. Checks for correct tile naming were performed. The BE data generally may contain some voids where insufficient energy
was reflected from the surface to generate a valid return from the terrain. Voids tend to occur in heavily vegetated areas,
water bodies, and beneath buildings, motor vehicles, bridges, etc. There were no gaps in the data due to insufficient side
overlap or instrument malfunctions.
ConceptualConsistency
measure Description
The FR and LR data is is supplied as an ASCII comma delimited file with each point represented with an X, Y and elevation.
The data is processed from the last return raw point cloud data. This bare earth (BE) data is consistent with the original
data. Data were filtered using automated procedures followed by manual editing to remove points that did not belong to the
terrain surface (e.g. water, vegetation, buildings, system (noise)).
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data
if it cannot be obtained from NOAA Coastal Services Center.
Distributor
distributor contact
-
distributor
individual Name Mike Sutherland
organisation Name
DOC/NOAA/NESDIS/NCEI > National Centers of Environmental Information, NESDIS, NOAA, U.S. Department of Commerce
Contact information
Telephone
Voice 303-497-6120
Fax 303-497-6513
Address
325 Broadway E/GC1, Boulder, CO, 80305-3328
Country USA
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data
if it cannot be obtained from NOAA Coastal Services Center.
notes: This metadata was automatically generated from the FGDC Content Standard for Digital Geospatial Metadata standard (version
FGDC-STD-001-1998) using the 2013-01-04 version of the FGDC RSE to ISO 19115-2 for LiDAR transform.
notes: Translated from FGDC 2013-01-22T13:13:16.932-07:00
Metadata contact
-
author
individual Name Mike Sutherland
organisation Name
DOC/NOAA/NESDIS/NCEI > National Centers of Environmental Information, NESDIS, NOAA, U.S. Department of Commerce
Contact information
Telephone
Voice 303-497-6120
Fax 303-497-6513
Address
325 Broadway E/GC1, Boulder, CO, 80305-3328
Country USA