The 2006 OSIP digital LiDAR data was collected during the months of March and May (leaf-off conditions). The LiDAR covers
the entire land area of the northern tier of Ohio (approximately 23,442 square miles. The LiDAR is delivered in county sets,
consisting of 5,000' x 5,000' size tiles. Where the State borders other states (land only), the entire border of the State
is buffered by at least 1,000-feet. Along the Lake Erie Shoreline ortho coverage is buffered beyond the shoreline a minimum
distance of 2,500-feet. Adjacent flight lines overlap by an average of 30 percent. LiDAR was collected with Leica ALS50 digital
LiDAR Systems. The file naming convention is as follows: Nxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State
Plane Coordinate System (North Zone). Sxxxxyyy = 5,000' x 5,000' LiDAR Tiles located in the Ohio State Plane Coordinate System
(South Zone). Please note that xxxx and yyy represent the easting and northing coordinates (respectively) in state plane feet,
The naming convention for each LiDAR tile is based upon (the bottom most-left pixel). The LiDAR was provided in LAS Format
containing the above ground and bare-earth LiDAR features. Ownership of the data products resides with the State of Ohio.
Orthophotography and ancillary data products produced through this contract are public domain data. LiDAR was acquired Statewide
to provide a solid and very accurate base to use during the image rectification process. This same LiDAR can be supplemented
with 3D breaklines to generate 2-foot and/or 4/5-foot contours. The average post spacing between LiDAR points is 7-feet. The
flying altitude was 7,300-feet AMT, with the targeted flying speed at 170 knots.
Citation
Title 2006 OSIP OGRIP: Upland Counties LiDAR Survey
publication Date
2013-08-20
presentationForm
imageDigital
cited responsible party
-
originator
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
organisation Name
State of Ohio Office of Information Technology (OSIP), Ohio Geographically Referenced Information Program (OGRIP)
cited responsible party
-
publisher
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
other Citation Details
Cinergi keyword enhanced.File generated at Thu Aug 24 09:51:34 UTC 2017
purpose:
The State of Ohio has a goal to develop and maintain a seamless statewide base map, referred to as OSIP (Ohio Statewide Imagery
Program). OSIP is an initiative partnered through several State Agencies (i.e. ODOT, ODNR) through OGRIP. Data from this project
forms the foundation of the Statewide base map, and was developed primarily to support multi-use applications, including homeland
security, emergency management, economic development, and the business of government.
Browse image (thumbnail):
thumbnail file name:
file type: kmz
thumbnail file description:
This kmz file shows the extent of coverage for the 2006 OGRIP Upland Ohio lidar data set.
Resource language:
eng; USA
Resource progress code:
completed
Resource Maintenance Information
maintenance or update frequency:
unknown
Constraints on resource usage:
Constraints
Use limitation statement:
These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that
temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual
surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.
Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data
are NOT to be used for navigational purposes.
Constraints on resource usage:
Legal Constraints
Use Limitation
While every effort has been made to ensure that these data are accurate and reliable within the limits of the current state
of the art, NOAA cannot assume liability for any damages caused by any errors or omissions in the data, nor as a result of
the failure of the data to function on a particular system. NOAA makes no warranty, expressed or implied, nor does the fact
of distribution constitute such a warranty.
Spatial representation type code:
vector
Resource extent
Geographic Extent
Geographic Bounding Box
westBoundLongitude
-84.826131
eastBoundLongitude
-80.497619
northBoundLatitude
41.730895
southBoundLatitude
41.176085
Temporal Extent
2006-03-18
2006-05-07
Credits:
This data set was acquired for the State of Ohio by Woolpert Inc. Subcontractors for LiDAR data acquisition included Horizons,
Inc.
point of contact
-
pointOfContact
individual Name Jeff Smith
organisation Name
State of Ohio, through the Office of Information Technology, Investment and Governance Division, for the Office of Information
Technology, Services Delivery Division and the Ohio Geographically Referenced Information Program (OGRIP)
position Name Project Administrator
Contact information
Telephone
Voice 614.466.4747
Fax 614.728.5297
Address
77 South High Street - Room 1990, Columbus, Ohio, 43215
Country USA
Description Registry that accesses the EPSG Geodetic Parameter Dataset, which is a structured dataset of Coordinate Reference Systems
and Coordinate Transformations.
name Of Measure Horizontal Positional Accuracy Report
evaluation Method Description
The LiDAR, meeting NMAS.
AbsoluteExternalPositionalAccuracy
name Of Measure Vertical Positional Accuracy Report
evaluation Method Description
The LiDAR was acquired to meet +/- 1-foot (0.03 m) vertical accuracy (RMSE of 0.5-foot - 95% confidence level). This is suitable
for rectification of digital orthophotography and for the creation of 2- and 5-foot contours (with the addition of 3D compiled
breaklines).
Completeness Commission
evaluation Method Description
The following methods are used to assure LiDAR accuracy. 1. Use of IMU and ground control network utilizing GPS techniques.
2. Use of airborne GPS in conjunction with the imagery and LiDAR acquisition. 3. The following software is used for validation
of the surface modeling 4. LiDAR Data - Terrascan, TerraModeler, Leica, Microstation, ESRI - ArcInfo, ERDAS Imagine, Woolpert
Proprietary software
ConceptualConsistency
measure Description
Compliance with the accuracy standard was validated by the collection of photo identifiable GPS ground control points during
the acquisition of LiDAR. The following checks were performed. The LiDAR data was checked against the project ground control.
The technical staff confirmed the accuracy of the points during initial processing. Airborne GPS was also utilized during
processing.
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data
if it cannot be obtained from NOAA Coastal Services Center.
Distributor
distributor contact
-
distributor
individual Name Mike Sutherland
organisation Name
DOC/NOAA/NESDIS/NCEI > National Centers of Environmental Information, NESDIS, NOAA, U.S. Department of Commerce
Contact information
Telephone
Voice 303-497-6120
Fax 303-497-6513
Address
325 Broadway E/GC1, Boulder, CO, 80305-3328
Country USA
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data
if it cannot be obtained from NOAA Coastal Services Center.
notes: This metadata was automatically generated from the FGDC Content Standards for Digital Geospatial Metadata standard (version
FGDC-STD-001-1998) using the 2013-01-04 version of the FGDC RSE to ISO 19115-2 for LiDAR transform.
notes: Translated from FGDC 2013-10-17T11:36:49.025-06:00
Metadata contact
-
author
individual Name Mike Sutherland
organisation Name
DOC/NOAA/NESDIS/NCEI > National Centers of Environmental Information, NESDIS, NOAA, U.S. Department of Commerce
Contact information
Telephone
Voice 303-497-6120
Fax 303-497-6513
Address
325 Broadway E/GC1, Boulder, CO, 80305-3328
Country USA