2011 U.S. Geological Survey (USGS) Topographic LiDAR: Louisiana Region 1
Dataset Identification:
Resource Abstract:
TASK NAME: Louisiana Region 1 LiDAR ARRA Task Order LiDAR Data Acquisition and Processing Production Task- Vermillion, Iberia,
St. Mary, Terrebonne, and Lafourche Parishes USGS Contract No: G10PC00057 Task Order No: G10PD02781 Woolpert ORDER NUMBER:
70930 CONTRACTOR: Woolpert, Inc. LiDAR data is a remotely sensed high resolution elevation data collected by an airborne platform.
The LiDAR sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The LiDAR
systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's
terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing
(NPS) of 2.0 meters. The final products include first, last, and at least one intermediate return LAS, full classified LAS
and a bare earth model in separate files.
Citation
Title 2011 U.S. Geological Survey (USGS) Topographic LiDAR: Louisiana Region 1
publication Date
2011-04-15
presentationForm
imageDigital
cited responsible party
-
originator
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
other Citation Details
Cinergi keyword enhanced.File generated at Thu Aug 24 09:55:34 UTC 2017
purpose:
This task order consisted of LiDAR data acquisition and processing for Vermillion, Iberia, St. Mary, Terrebonne, and Lafourche
Parishes in southeastern Louisiana. The task order area of interest encompasses approximately 6,684,759,312 square meters
(2,581 square miles). The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 2.0 meters. The
LiDAR data was collected to meet a vertical accuracy requirement of 12.5 cm (0.41 ft) RMSE, or better. The final LiDAR data
was delivered as 1,500m x 1,500m tiles, aligned to even 1,500m coordinates.
Browse image (thumbnail):
thumbnail file name:
file type: kmz
thumbnail file description:
This kmz file shows the extent of coverage for the 2011 ARRA USGS Lousiana Region 1 lidar data set.
Resource language:
eng; USA
Resource progress code:
completed
Resource Maintenance Information
maintenance or update frequency:
asNeeded
Constraints on resource usage:
Constraints
Use limitation statement:
These data depict the elevations at the time of the survey and are only accurate for that time. Users should be aware that
temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual
surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.
Any conclusions drawn from analysis of this information are not the responsibility of NOAA or any of its partners. These data
are NOT to be used for navigational purposes.
Constraints on resource usage:
Legal Constraints
Use Limitation
While every effort has been made to ensure that these data are accurate and reliable within the limits of the current state
of the art, NOAA cannot assume liability for any damages caused by any errors or omissions in the data, nor as a result of
the failure of the data to function on a particular system. NOAA makes no warranty, expressed or implied, nor does the fact
of distribution constitute such a warranty.
Spatial representation type code:
vector
Resource extent
Geographic Extent
Geographic Bounding Box
westBoundLongitude
-92.136664
eastBoundLongitude
-90.239927
northBoundLatitude
29.804761
southBoundLatitude
29.039005
Temporal Extent
2011-01-22
2011-04-12
Additional information on resource:
The reflective surface data represents the DEM created by the laser energy reflected from the first surface encountered by
the laser pulse. Some energy may continue beyond this initial surface, to be reflected by a subsequent surface as represented
by the last return data. Intensity information is captured from the reflective surface pulse and indicates the relative energy
returned to the sensor, as compared to the energy transmitted. The intensity image is not calibrated or normalized but indicates
differences in energy absorption due to the interaction of the surface materials with laser energy, at the wavelength transmitted
by the sensor. The bare earth model is created by identifying the returns that fall on the ground surface and by interpolating
a surface between these points. In this manner, buildings and vegetation are removed from the bare earth model. This data
set does not include bridges and overpasses in the bare earth model as the delineation point for these structures is not reliably
discernible in the LiDAR data.
point of contact
-
pointOfContact
organisation Name
USGS (United States Geological Survey)
position Name USGS NGTOC
Contact information
Telephone
Voice (573) 308-3654
Fax (573) 308-3810
Address
1400 Independence Rd., Rolla, MO, 65401
Country USA
hoursOfService 8:00 a.m. to 5:00 p.m. Central Time
Description Registry that accesses the EPSG Geodetic Parameter Dataset, which is a structured dataset of Coordinate Reference Systems
and Coordinate Transformations.
name Of Measure Horizontal Positional Accuracy Report
evaluation Method Description
Horizontal accuracy is +/- 3.8-foot at the 95% confidence level using RMSE(r) x 1.9600 as defined by the FGDC Geospatial Positional
Accuracy Standards, Part 3: NSSDA.
AbsoluteExternalPositionalAccuracy
name Of Measure Horizontal Positional Accuracy
measure Description
LiDAR system calibration is available in the project report.
Quantitative Result
result value 1.16
value Units
AbsoluteExternalPositionalAccuracy
name Of Measure Vertical Positional Accuracy Report
evaluation Method Description
The LiDAR data vertical accuracy RMSE is 7.0 cm (0.229 ft). The data collected under this Task Order meets the National Standard
for Spatial Database Accuracy (NSSDA) accuracy standards. The NSSDA standards specify that vertical accuracy be reported at
the 95 percent confidence level for data tested by an independent source of higher accuracy. (http://www.fgdc.gov/standards/projects/FGDC-standards-projects/accuracy/part3/index_html).
The Fundamental Vertical Accuracy (FVA) of the TIN: 13.72 cm (0.45 ft) at a 95% confidence level, derived according to NSSDA,
i.e., based on RMSE of 12.5 cm in the "open terrain" land cover category.
AbsoluteExternalPositionalAccuracy
name Of Measure Vertical Positional Accuracy
measure Description
Tested 13.72 cm (0.45 ft) vertical accuracy at 95 percent confidence level.
Quantitative Result
result value 0.07
value Units
Completeness Commission
evaluation Method Description
The LIDAR data is visually inspected for completeness to ensure that are no gaps between flight lines.
ConceptualConsistency
measure Description
All formatted data are validated using commercial GIS software to ensure proper formatting and loading prior to delivery.
QuantitativeAttributeAccuracy
name Of Measure Quantitative Attribute Accuracy Assessment
measure Description
Points measured will produce an error less than 12.5 cm (0.41 ft) RMSE.
evaluation Method Description
The LiDAR collected for this task order was collected at a vertical accuracy of 12.5 cm (0.41 ft) Root Mean Squared (RMSE),
or better.
organisation Name
DOC/NOAA/NOS/OCM > Office for Coastal Management, National Ocean Service, National Oceanic and Atmospheric Administration,
U.S. Department of Commerce
Contact information
Telephone
Voice 843-740-1200
Address
2234 South Hobson Ave., Charleston, SC, 29405-2413
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR data. NGDC should only be contacted for this data
if it cannot be obtained from NOAA Coastal Services Center.
Distributor
distributor contact
-
distributor
individual Name Mike Sutherland
organisation Name
DOC/NOAA/NESDIS/NCEI > National Centers of Environmental Information, NESDIS, NOAA, U.S. Department of Commerce
Contact information
Telephone
Voice 303-497-6120
Fax 303-497-6513
Address
325 Broadway E/GC1, Boulder, CO, 80305-3328
Country USA
Ordering Instructions
The National Geophysical Data Center serves as the archive for this LIDAR dataset. NGDC should only be contacted for the data
if it cannot be obtained from NOAA Coastal Services Center.
notes: This metadata was automatically generated from the FGDC Content Standards for Digital Geospatial Metadata standard (version
FGDC-STD-001-1998) using the 2013-01-04 version of the FGDC RSE to ISO 19115-2 for LiDAR transform.
notes: Translated from FGDC 2013-01-22T13:16:23.199-07:00
Metadata contact
-
author
individual Name Mike Sutherland
organisation Name
DOC/NOAA/NESDIS/NCEI > National Centers of Environmental Information, NESDIS, NOAA, U.S. Department of Commerce
Contact information
Telephone
Voice 303-497-6120
Fax 303-497-6513
Address
325 Broadway E/GC1, Boulder, CO, 80305-3328
Country USA