2015 USGS Lidar DEM: 3DEP Co-Op South Central MS.

Dataset Identification:

Resource Abstract:
description: Mississippi Coastal QL2 Lidar with 3DEP Extension Lidar 0.7m NPS Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G15PD00091 Woolpert Order No. 75157 CONTRACTOR: Woolpert, Inc. This metadata record describes the 1m bare earth Digital Elevation Models (DEMs)for the following counties in Mississippi: Copiah, Lawrence, Lincoln, Pike, and Simpson. This task is for a high resolution data set of lidar covering approximately 5981 square miles. The lidar data was acquired and processed in compliance to U.S. Geological Survey National Geospatial Program Lidar Base Specification version 1.2. The lidar data was acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, one (1) meter pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and 8-bit intensity images. Gridded products conform to a 1500 m x 1500 m tiling scheme. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, control data, flight line vectors and tile index provided as ESRI shapefile, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Ground conditions: Water at normal levels; no unusual inundation; no snow; leaf off. In addition to the bare earth DEMs, the topobathy lidar point data are also available. These data are available for custom download here: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=6306 Breaklines created from the lidar area also available for download in both gdb and gpkg format at: https://coast.noaa.gov/htdata/lidar2_z/geoid12b/data/6306/breaklines. The DEM and breakline products have not been reviewed by the NOAA Office for Coastal Management (OCM) and any conclusions drawn from the analysis of this information are not the responsibility of NOAA, OCM or its partners.; abstract: Mississippi Coastal QL2 Lidar with 3DEP Extension Lidar 0.7m NPS Lidar Data Acquisition and Processing Production Task USGS Contract No. G10PC00057 Task Order No. G15PD00091 Woolpert Order No. 75157 CONTRACTOR: Woolpert, Inc. This metadata record describes the 1m bare earth Digital Elevation Models (DEMs)for the following counties in Mississippi: Copiah, Lawrence, Lincoln, Pike, and Simpson. This task is for a high resolution data set of lidar covering approximately 5981 square miles. The lidar data was acquired and processed in compliance to U.S. Geological Survey National Geospatial Program Lidar Base Specification version 1.2. The lidar data was acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, one (1) meter pixel raster DEMs of the bare-earth surface in ERDAS IMG Format, and 8-bit intensity images. Gridded products conform to a 1500 m x 1500 m tiling scheme. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, control data, flight line vectors and tile index provided as ESRI shapefile, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format, and LAS swath data. Ground conditions: Water at normal levels; no unusual inundation; no snow; leaf off. In addition to the bare earth DEMs, the topobathy lidar point data are also available. These data are available for custom download here: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=6306 Breaklines created from the lidar area also available for download in both gdb and gpkg format at: https://coast.noaa.gov/htdata/lidar2_z/geoid12b/data/6306/breaklines. The DEM and breakline products have not been reviewed by the NOAA Office for Coastal Management (OCM) and any conclusions drawn from the analysis of this information are not the responsibility of NOAA, OCM or its partners.
Citation
Title 2015 USGS Lidar DEM: 3DEP Co-Op South Central MS.
creation  Date   2018-02-07T20:54:44.188355
Resource language: 
Processing environment:  
Back to top:

Resource distribution information

Digital Transfer Options
Linkage for online resource
name Dublin Core references URL
URL: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=6307
protocol WWW:LINK-1.0-http--link
link function information
Description URL provided in Dublin Core references element.
Linkage for online resource
name Dublin Core references URL
URL: https://coast.noaa.gov/htdata/raster2/elevation/MS_3DEP_COOP_DEM_2015_6307
protocol WWW:LINK-1.0-http--link
link function information
Description URL provided in Dublin Core references element.
Linkage for online resource
name Dublin Core references URL
URL: https://coast.noaa.gov/dataviewer
protocol WWW:LINK-1.0-http--link
link function information
Description URL provided in Dublin Core references element.
Linkage for online resource
name Dublin Core references URL
URL: https://coast.noaa.gov/dataregistry
protocol WWW:LINK-1.0-http--link
link function information
Description URL provided in Dublin Core references element.
Linkage for online resource
name Dublin Core references URL
URL: https://coast.noaa.gov
protocol WWW:LINK-1.0-http--link
link function information
Description URL provided in Dublin Core references element.

Metadata data stamp:  2018-08-06T23:59:02Z
Resource Maintenance Information
maintenance or update frequency: 
notes: This metadata record was generated by an xslt transformation from a dc metadata record; Transform by Stephen M. Richard, based on a transform by Damian Ulbricht. Run on 2018-08-06T23:59:02Z
Metadata contact - pointOfContact
organisation Name  CINERGI Metadata catalog
Contact information
Address
electronic Mail Address cinergi@sdsc.edu
Metadata language  eng
Metadata character set encoding:   utf8
Metadata standard for this record:  ISO 19139 Geographic Information - Metadata - Implementation Specification
standard version:  2007
Metadata record identifier:  urn:dciso:metadataabout:b9bd80b0-c360-41e4-ad3a-0d86201a3470

Metadata record format is ISO19139 XML (MD_Metadata)